Dodge 47RE, 48RE Transmission Controller - Black. Will also work for the 47RH series.
Controller Actual Dimensions = Width 5.25" Height 3" Depth 1.75"
Close X
TCM 930
$695
Includes FREE shipping to lower 48 US states!Controller Actual Dimensions = Width 5.25" Height 3" Depth 1.75"
Dodge 46RE Controller designed for Gas engine applications. Will also work with some 47 series. Has a Silver PowderCoat finish.
The TCM932 is the easiest plug and play way of controlling the Dodge 46RE transmission. It works with the stock valve body and provides fully automatic shifts based on the VSS (Vehicle Speed Sensor) and TPS input and other adjustable settings. The fully adjustable VSS signal controls the shifting for 1st to 2nd & 3rd.The shift points are adjustable right on the controller. No PC required! MPH setting can be adjusted for most gear ratios and tire size. Overdrive 4th gear and TCC engage are individually adjustable and set independent of the other gears. The new TCM932 has 4 easy to access setup buttons with glowing indicators and it includes a 6 ft. harness made from high temp automotive TXL wire and our premium automotive grade connectors. ( transmission connector not included) If you need the 8 pin valve body connector or 2 pin VSS plug they are available.
TCM932 is built specifically for the 46RE transmission. All settings are done right from the controller and viewed on the 2 Line LCD screen, no PC programming required.
Doing a conversion using the Dodge 4 speed O/D transmission? The TCM932 is a stand alone controller and will work with or without a ECM on the vehicle. From stock pickups to Ford or GM swaps to Rat Rods the TCM932 will work for you.Controller Actual Dimensions = Width 5.25" Height 3" Depth 1.75"
$695
Global shipping available!Controller Actual Dimensions = Width 5.25" Height 3" Depth 1.75"
The new TCM440 Kit is a standalone controller kit for the Dodge 4 speed automatics including the 42RE, 44RE, 46RE and 47RE transmissions. This is a full manual controller with direct control over Gear selection and TCC lock. Requires no programming - Plug and Play. Easily connect the input wires directly to the controller with the new set screw terminal block!
TCM440 Kit $469
Flatrate $30 UPS Ground shipping to all 48 lower US states!
The TCM920B is a fully automatic controller for the GM 4 series transmissions. Requires no PC for programming or setup , all settings including gear change and TCC engage are made right from the front of the controller with the 4 small buttons and the 2 Line LCD screen.
Works with all GM 4L60E to 4L80E RWD and 4T45E, 4T60E, 4T65E, 4T80E FWD transmissions. Full manual shifting mode as well with one of our optional Ratchet shift boxes (sold separately).Includes our custom 6 foot wire harness made from high temp TXL automotive grade wire with foil shielded signal wires. (Connectors sold separately)See the products page for all your connector needs.
$395
Controller Actual Dimensions = Width 5.25" Height 3" Depth 1.75"
The TCM920S is a fully automatic controller for the GM 4 series transmissions. Requires no PC for programming or setup , all settings including gear change and TCC engage are made right from the front of the controller with the 4 small buttons and the 2 Line LCD screen.
Works with all GM 4L60E to 4L80E RWD and 4T45E, 4T60E, 4T65E, 4T80E FWD transmissions. Full manual shifting mode as well with one of our optional Ratchet shift boxes (sold separately).Includes our custom 6 foot wire harness made from high temp TXL automotive grade wire with foil shielded signal wires. (Connectors sold separately)See the products page for all your connector needs.
$395
Controller Actual Dimensions = Width 5.25" Height 3" Depth 1.75"
Our proprietary 2″ Digital Gauge gives you a visual indication of the GEAR, LINE PRESSURE and TCC LOCK.
(Will only work with ManuMatic and TCM920)
$65